How do I fix Worcester Bosch H07?

Try first: Look at the pressure gauge — if it's under 1 bar, top up using the filling loop (the silver braided tap) to about 1.2–1.5 bar; Press the reset button once. If that doesn't clear it, the likely part is Expansion vessel or pressure sensor.

Worcester Bosch H07 Fault — What It Means & Fix Cost

⚠ This is the likely cause from the code — a Gas Safe registered engineer confirms it on site. If you can smell gas, stop and ring 0800 111 999.

✅ Try these first — they're free

Often clears it without a callout:

Look at the pressure gauge — if it's under 1 bar, top up using the filling loop (the silver braided tap) to about 1.2–1.5 bar
Press the reset button once

🔧 If that doesn't fix it

The likely cause is one of these — the engineer confirms which:

Most likely part: Expansion vessel or pressure sensor

Fixed repair price

£144

Inc. VAT — part & labour, no surprise callout fee. You only pay if you go ahead.

A vetted Gas Safe engineer who covers your postcode will call you back to arrange the repair. No callout fee — you only pay if you go ahead.

Other Worcester Bosch fault codes

Worcester Bosch A1Pump stuck or running dry.…Worcester Bosch A5Fan or air-pressure fault.…Worcester Bosch A61Gas valve fault.…Worcester Bosch C6Fan speed error — the fan isn't running at the expected spee…

Worcester Bosch H07 — what it means

✅ Try these first — they're free

🔧 If that doesn't fix it

Other Worcester Bosch fault codes

Book your repair